FAQs

See All Keyboards

  • What are the dimensions of X-Bows?

    We designed X-Bows so that it would fit into nearly any setup. The dimensions are:

    Nature and Knight: 345mm x 137mm x 30mm

    Knight Plus: 415mm x 137mm x 30mm

  • How quiet is X-Bows? Can I use it in my office?

    The switches you choose will determine how loud your X-Bows is. Blue switches are very loud. Alternatively, Silent Brown or Silent Red switches are perfect for an office and are around the same volume as laptop keys. 

  • Do I need to install any software to use X-Bows?

    No, X-Bows is plug-and-play. For remapping, you can use our web-based QMK software. Your IT department shouldn't have any problem with X-Bows because no 3rd party software needs to be installed on your computer. 

  • Will the labels on the keycaps fade over time?

    No, X-Bows uses laser engraved keycaps. So no matter how long you use your X-Bows for, the labels will never fade or wear away. 

  • How can you tell if Caps Lock is on?

    The backlighting behind the caps lock key will shine white when caps lock is activated. This will show no matter what other backlighting settings you may be using at the time. 

  • Will X-Bows work with Mac / Linux?

    Yes! Our software is web-based, so it will work with any operating system. 

  • Can you change the angle of X-Bows?

    X-Bows can be adjusted at the back to create an upward angle. X-Bows does not offer negative tilt. 

  • How many key rollover does X-Bows support?

    X-Bows supports N-Key rollover. For gaming, or very fast typing, this means that no matter how many keys you press simultaneously, none will ghost or go unrecorded. 

  • Is X-Bows waterproof?

    X-Bows is rated to withstand splashes and dust. However, it is not fully waterproof and we don't recommend that you intentionally get it wet. 

  • Can I replace the switches with another brand of switches?

    Probably, yes. X-Bows uses hot-swappable 3-pin switches by Gateron. Most Cherry MX or Cherry MX clone switches (Gateron, Kailh, Outemu, Zeal, etc.) will work with X-Bows. 

  • Will the keyboard remember the customizations? For instance, could i go to a PC and configure the backlights, then use on my Mac with those same settings?

    Yes. The key remapping settings are stored onto the keyboard's memory, so it will work across devices. 

Have another question? Send us an email to support@x-bows.com and we'll do our best to answer.